COMPANY PRODUCT

1.Application:
ZXQ-5 Automatic Metallographic Specimen Mounting Press is a kind of full automatic mounting press, equipped with in-out water cooling system.
It is suitable for the heat mounting (thermohardening & thermoplastic) for all kinds of materials.
After the parameters such as heating temperature, heat preserving time and applied force etc. are setup, put the specimen and mounting material into the machine, close the cover and press the start button,then the machine will finish the job automatically.
It is not necessary for the operator to be on duty.
According to different requirements of the material,there are four kinds of moulds that can be chosen to meet the demands at will. Also it is available to prepare two pieces of specimens at the same time, the capacity is doubled.

2.Technical Parameters:

Model	ZXQ-5
Pattern Specification	Φ25mm, Φ30mm, Φ40mm, Φ50mm
Power Supply	220V, 50Hz
Maximum Consumption	1800W
Pressure	0~2MPa
Temperature Setting Range	0~180°C
Holding Time	0~99 minutes And 99 seconds
Outline Dimension	625*505*500mm
Weight	110.00 KG
Cooling	Water Cooling